|
|
|
|
|
|
Carbon Fiber DOT 9 Liter/90 CF Vessel & QuickBleed System
|
1 in stock!
|
|
|
Manufactured 07/2022. USA DOT certificate. 9 Liter (1hr or 90 Cubic Foot) Carbon Fiber Vessel. These tanks are new stock and include everything you need to fill ALL Tanks or AG's with male Foster quick connect. Mac1 Outlet is fitted with a male Foster QC on the valve outlet. Outlet has Push Button Bleeder(QuickBleed). 5000 PSI Hose and Foster Female Quick Connects means you can fill tanks to 4500 or fill this tank with the Microbore line supplied. DOT CERTIFICATE EXPIRES JULY 2037. Carry Strap and 100% Urethane 90 Durometer Mil Spec Seal upgrade throughout the system gives Mac1 Packages OVERKILL. Delivery will be on arrival in Late August.
|
|
|
|
|
|
|
|
|
|
22 CI Regulated PSI HPA Tank
|
|
13 in stock!
|
|
|
PSI regulated HPA air tank 3000 psi max input PSI/22CI. Foster type male fill nipple. Tank pressure available in 1000, 1200, 1400, 1600 & 1800 PSI output. Higher than 1000 PSI Output is a $25 premium. All the Reg pistons get upgraded to 90 durometer Mil Spec orings to extend service intervals. Catalina Cylinder with Ninja Reg. Made in USA. Orings Upgraded throughout w/ Mil Spec 90's, Regulator output pressure is verified, pressure tested and assembled by Mac1.
|
|
|
|
|
|
|
|
|
|
13CI Regulated 3000 PSI HPA Tank w/800, 1000, 1200 or 1400 Output
|
|
6 in stock!
|
|
|
Standard Output 800 psi regulated air tank 3000 psi max input PSI/13CI. Tank has Foster type male fill and Tank pressure gauge. $15 extra for 1000 PSI. $35 more for 1200 or higher PSI Output. LD MKI pistols should not be run past 1000 PSI on HPA. All the Reg pistons get upgraded
to 90 durometer Mil Spec orings to extend service intervals & get the Mac 1 Magna-Cap inlet Dust cover. Made in USA. Upgraded, pressure tested & reg tested By Mac1.
|
|
|
|
|
|
|
|
|
|
SCBA Adapter(CGA347 or 346) with 30" Hose & Push Button Bleed
|
|
1 in stock!
|
|
|
Firefighter yoke (CGA 347 or 346) for filling AirGuns from High Pressure 4500 PSI Carbon Fiber Tanks and lower pressure output Fire Tanks. Includes Puch Bottun Bleeder, 30" line with full length strain relief cover. Has High Pressure(5K) Female QC on hose ends. Can also be utilized to fill tank through yoke with hose removed or not. The Hand tight wheel is gold anodized aluminum. Assembled in the USA from the best High Pressure parts I could find. Can add Double male and Mini-Cascade coupler as accessories.
|
|
|
|
|
|
|
|
|
|
High Pressure Foster Quick Connect Yoke with gauge, 30" Hose & Push Button Bleed
|
|
7 in stock!
|
|
|
Foster Female adapter for filling AirGun Tanks from High Pressure 4500 PSI
Carbon Fiber Tanks. For tanks using Foster HP Male Quick Connect on tank valve. Adapter has an integral push button bleeder and gauge. Assembled
in the USA from the best High Pressure parts I could find. All orings
in QC's and bleeder are upgraded to Mac1 specifications.
|
|
|
|
|
|
|
|
|
|
DIN 300 Universal Filling Adapter w/ 30" hose
|
|
2 in stock!
|
|
|
For filling AirGuns from High Pressure 4500 PSI Carbon Fiber Tanks with
DIN 300 Outlet. Includes Push button Bleeder, Gauge, 30" hose and High
Pressure Female Quick Connect on hose ends. Assembled in the USA from
the best High Pressure parts I could find. Tank can fill from the Male
Quick Connect on adapter end or through the Female QC on hose end. 30"
Hose has full length metal strain relief.
|
|
|
|
|
|
|
|
|
|
Ninja Regulator 3K input w/800, 1000 & 1200 Plus PSI Output
|
|
8 in stock!
|
|
|
This is the American made Ninja Regulator. It includes the Ninja Magna Cap on the Inlet QC and a Protective cap with spare oring on the reg.UPGRADE 90 durometer Mil Spec Urethane O-ring seals on the reg piston assembly we consider Standard @ Mac1. The Standard Painball regulator output of 800 PSI uses a coil spring arrangement that can be shimmed up to 1000 PSI for an additional $15. Beyond that PSI the Regs are all using Bellvilles for springing with the Same Piston being used for both Coil spring and Bellevilles.
1200 PSI Regs & Higher are available for $35 more. We carry 800, 1000, 1200 and 1400 PSI Regs. 800 is the best solution when your charging a system meant originally for CO2 pressures. This is the Regulator only and does not include the pressure vessel. It is designed to be used on a 3000 PSI vessel with 5K protection for the vessel and 1.8K protection for the downstream gun on 800, 1000 & 1200 PSI. 1400 PSI and above regs use a 3K burst disc for the downstream and all 3K Tanks use a 5K for the vessel protection.
|
|
|
|
|
|
|
|
|
|
DIN 300 Universal Filling Adapter with HP Female Foster/No Hose
|
|
4 in stock!
|
|
|
DIN 300 adapter for filling AirGun Tanks from High Pressure 4500 PSI Carbon Fiber Tanks. Female Foster HP Quick Connect on outlet. The Hand tight wheel is handy and has an integral push button bleeder. Assembled in the USA from the best High Pressure parts I could find. All orings upgraded to Mac1 specifications.
|
|
|
|
|
|
|
|
|
|
Universal Charging Yoke(K-Valve)
|
|
5 in stock!
|
|
|
Standard 3000 PSI K-Valve type Yoke for filling guns or tanks with Foster male Inlet. Includes gauge, bleeder, braided line and 3K Foster type female Quick Connect hose end. Made in USA. The yoke has a relief machined so it can fit Tanks with high valve webs and some Din Tanks with K-Valve threaded adapter fitted. It truly is a universal adapter able to fit nearly anything with a K or J valve. You can option a liquid Filled 2" high quality gauge so the accuracy and readability is enhanced considerably. Adds $25. Microbore Ninja 18" Line with strain relief Adds $20.
|
|
|
|
|
|
|
|
|
|
Regulator Output Tester for HPA/ASA
|
|
5 in stock!
|
|
|
This assembly makes for an outstanding regulator output tester for HPA regulated Painball tanks. Mac1's Tank-Top adapter connected to a Ninja slide check in series with a 3K output Gauge allows you to Set Regulator Output and cycle the system to check for reg creep and consistency. Gauge increments are 50 PSI. Uses a Glycol filled \stainless steel Gauge. Slide check shuts off flow and vents downstream pressure. I leave gauge hand tight, so when the set pressure is determined, the slide check shuts flow off and vents line pressure so You can remove the gauge and then dump tank pressure by re-opening slide check. No other tools required. Pressure up to 2000 PSI reg output can be set with this assembly.
|
|
|
|
