COMPANY INFO




  Home > REBUILD PARTS >

600 Crosman Valve Stem Assembly
600 Crosman Valve Stem Assembly


 
Our Price: $20.00


Product Code: CR600STAS
Qty:

Description
 
Valve Stem Assembly for Professional Rebuild of the Crosman 600. Can be cut down to fit many other models. It is a faithful copy of the Original Factory Part. We use 100% Polyurethane seals so our guns DON'T Leak. Made in USA by Mac1. Heat the entire gun up to toasty when you first charge it so the seals will be supple and the pressure will be high. Making sure there is no damage to the valve seat where the seal sits is very important as the Mac1 seals are hard enough so you can leave the gun charged all the time. Getting it to seal initially can be impossible if there is any seat irregularity. Polishing the seat is often required to remove any scratches or abuse. If you use the parts that make for the most reliable repairs imaginable a DIY project can be the best investment you ever made in an airgun. Quality parts last. Your time is wasted when you use inferior parts.

Share your knowledge of this product. Be the first to write a review »