COMPANY INFO




  Home > REBUILD PARTS >

Sheridan & Benjamin Bolt Lug Tool



 
Our Price: $8.00

Quantity in Stock:18

Product Code: M1SHLUGTO
Qty:

Description
 
Replace your bolt lug with an appropriate tool for the job. Makes changing bolt orings on the Sheridan rifles and pistols routine and bolt lug upgrades on 342 & 347 Benjamin rifles easy.  Steel & Stainless Steel Construction unfinished. Made in USA by Mac1. The lug should be as long as possible so you want to make sure the lug will just clear the tube when it swings down and it doesn't bind on the hammer when it pulls it back.
The Mac1 Sheridan bolt lug is an upgrade lug for all the Benjamin series rifles (that had a less than robust lug). The lug should wind up with one of the hex flats aligned with the Cam face angle for maximum surface engagement between those parts.
Cam adjustment must be made when you reinstall cam plate & cover. Assemble loosely making sure cam is behind lug. Push forward on the back of the cam cover with Bolt handle 1/2 way open while tightening the cam screws. If the adjustment is correct the handle will feel snug before it gets near the fully closed position. This pushes the bolt forward to make a seal and keep the bolt from opening when gun fires.
This is the tool for all Rocker Safety Sheridan guns and will Install Sheridan Bolt lugs in Benjamin Rifles. Lug not included. American Made is.

Share your knowledge of this product. Be the first to write a review »