COMPANY INFO



Home > SCOPES/MOUNTS
Sort By:
Page of 4
Centerpoint 4-16X40 Mil Dot IR Adventure Class
Centerpoint 4-16X40 Mil Dot IR Adventure Class
Our Price: $100.00
6 in stock!

This 4-16X40 scope is 1" Tube AO scope and it can be fitted to most any airgun or firearm that can accept a rifle scope. It focuses from 5 yards to infinity via front objective lens adjust. It is tough enough to be put on recoiling spring guns as well as centerfire rifles. It has Illuminated green or red color Mil Dot reticle, flip up lens covers and comes with a spare battery and 1" Quick Release Weaver style Rings. more info
QRW 30MM High Rings
QRW 30MM High Rings
Our Price: $80.00
2 in stock!

Quick Release Weaver Leupold Rings are what we use when we want to be able to remove our scopes for traveling to matches. These clamp to Weaver or Picatinny rails and when you clamp them back on your gun they go back to the exact zero you always have. These mounts are what we use on all the US FT and Hunter rifles we fit with 30MM tube scopes. more info
AirForce Fiber Optic Open Sights
AirForce Fiber Optic Open Sights
Our Price: $71.95
1 in stock!

AirForce makes a Set of Open Sights that can be fit to the entire range of AF guns. The rear fits the top rail the the front fits the upper receiver rail.
The AirForce platform is pretty much a Lego or Erector set type modular gun that can be configured in a plethora of ways with a nearly infinite possibility for sighting arrangements that can be fitted to the multi rails. The gun tends to be an accessorisers dream come true and the number of attachments can approach the more sophisticated Tactical set-ups you see. The Blacked out look of the gun has a big attraction and some of the AF guns you see are over the top with lights, lasers, slings and you name it, it will find it's way onto an AF gun. Whether it is a spirit level, night vision or incline-meter it will be able to be fitted in so many ways you can figure out exactly where it needs to go for your application
No two AF guns are exactly alike because there are so many options it is mind numbing. Often the only solution is to have two guns so you can enjoy different configurations at the same shooting session.
more info
AirForce Bipod
AirForce Bipod
Our Price: $70.00
1 in stock!

AirForce makes a Bipod for their rifles that connects to the 11MM groove at the bottom of the action. This bipod will fit AirForce guns or you can mount a rimfuire/airgun type groove on the bottom of your gun to use it on anything else. more info
QRW 1" High Rings
QRW 1" High Rings
Our Price: $70.00
1 in stock!

Quick Release Weaver Leupold Rings are what we use when we want to be able to remove our scopes for traveling to matches. These clamp to Weaver or Picatinny rails and when you clamp them back on your gun they go back to the exact zero you always have. These mounts are what we use on all the US FT and Hunter rifles we fit with 1" tube scopes. more info
Strip T's Air Stripper
Strip T's Air Stripper
Our Price: $75.00
Sale Price: $55.00
Savings: $20.00
7 in stock!

Mac1 designed and manufactured Strip T's Air Stripper for AirRifles & AirPistols. Designed with an adjustable cone so the pellet path can align with the cone absolutely. Spacers are available so the Air Stripper can be fitted to guns that don't have 16MM diameter barrels. The Strip T's was fitted to the Rifle Tim McMurray Shot for the 2014 Extreme Bench Rest Match. 239/8X is the Record Score at 75 Yards Tim Shot with the Long Ranger Mac1 .30 cal with TJ Barrel.
I have the 16MM strippers made up and when a barrel is .435"/11MM we have a spacer made up for that. I can fit barrels from 11MM to 19MM. Custom spacers are going to be $25 Extra. You need to put in your order notes the Dimension for the OD of the barrel you have. The Air Stripper fits on the end of the barrel approximately 1.5". Strip T's come with a wood pilot for the designated caliber(s).
The M-Rod version has no pilot as it is a shroud mounted unit and a wood Pilot wouldn't be that useful.
more info
Crosman IA .435" Scope Base
Crosman IA .435" Scope Base
Our Price: $50.00
18 in stock!

The IA Scope Base fits any rifle with a .435" or 11MM barrel diameter. All Early Pre 50's Crosman guns have that diameter. The 112-115, all the 100 series pump and CO2 guns. ALL the Modern Crosman guns made with the 7/16" thin barrel will be able to use the Crosman IA. It looks just like the IA Benj/Sheridan shown but the hole for barrel is bigger and the screws are smaller to compensate.
Since the base clamps to the barrel it can be easily used for mid barrel (Scout set-ups) or it can cantilever back over the breech and allow a rifle scope to have proper eye relief while allowing the user to put the pump loads through the front scope mount and base with no chance of slippage. This is the finest scope mount ever produced for Pump rifles and it's namesake Ingvar Alm has passed now and his mount will always be called the IA in his memory. RIP Buddy.
more info
Benjamin/Sheridan IA Scope Base
Benjamin/Sheridan IA Scope Base
Our Price: $50.00
56 in stock!

The IA Scope Base fits any rifle with a .345" barrel diameter. All Sheridan's and Benjamin's in .22 have that diameter. .177 cal 317 and 347 will not fit. 1989 models and later in all calibers have that diameter so it can be used on ALL Dan & Benjy guns made after 1988.
Since the base clamps to the barrel it can be easily used for mid barrel (Scout set-ups) or it can cantilever back over the breech and allow a rifle scope to have proper eye relief while allowing the user to put the pump loads through the front scope mount and base with no chance of slippage. This is the finest scope mount ever produced for Pump rifles and it's namesake Ingvar Alm has passed now and his mount will always be called the IA in his memory. RIP AG Buddy.
more info
BKL 263HMB 1" High Split Ring Mounts
BKL 263HMB 1" High Split Ring Mounts
Our Price: $42.00
1 in stock!

This mount is made for 1" tube scopes with up  to 50MM objectives.  BKL mounts and risers have the desirable feature that they accomodate the variety of real rail widths to make sure the glass is always centered on the action. Nearly every mount made has offsets to the guns centerline but the BKL system has a better approach and it also often allows the use of open sights with scope mounted. This is because of the central slot in the BKL extrusion. I find this slot very handy to get me close to the target with my optics whenever I'm having difficulty finding an elusive target. These rings have two clamping straps per ring and will hold the scope very well and distribute the loads in the best way possible with both rings sharing the load. There are no scope stops on BKL mounts but they are so strong they rarely have the need. Scope stops represent a failed systems bandaid and if both mounts are not equally stopped the scope tube suffers.
BKL Technology is an AirForce Company so the same man is behind both product lines. He grabbed the BKL company when they floundered and we are all lucky he did. That was American technology we did need and John McCasilin was wise enough to make it happen..
more info
Crosman XT Steel Breech
Crosman XT Steel Breech
Our Price: $35.00
3 in stock!

This is the Breech from the Early Crosman 2250XT. It fits the 2240, 2250, 2260 and 1322/1377 etc. (with the forward positioned breech screw). You should opt for the Steel threaded Handle because the breech will not work with the bolt & handle from the plastic factory breech. The factory Bolt will need to be threaded 8/32 to accept the threaded bolt handle. It is easier to opt for the Extended Bolt Probe with better bolt o-ring and it already has the 8/32 threads for the handle. The Steel breech has scope grooves as well as a cross cut groove to accept the LPA adjustable rear sight. The XT breech has no facility to reuse the factory plastic rear sight. When fitting the steel breech on 1322/2240 etc the rear breech screw will need to be shortened by 1/8" to avoid bottoming in the hole.
more info