COMPANY INFO




  Home > CO2/HPA PARTS >

Ninja Regulator 3K input w/800, 1000 & 1200 Plus PSI Output
Ninja Regulator 3K input w/800, 1000 & 1200 Plus PSI Output


 
Our Price: $60.00

Quantity in Stock:(Out of Stock)

Product Code: PSIREG3K


Pressure:

Qty:  
Description
 
This is the American made Ninja Regulator. It includes the Ninja Magna Cap on the Inlet QC and a Protective cap with spare oring on the reg.UPGRADE 90 durometer Mil Spec Urethane O-ring seals on the reg piston assembly we consider Standard @ Mac1. The Standard Painball regulator output of 800 PSI uses a coil spring arrangement that can be shimmed up to 1000 PSI for an additional $15. Beyond that PSI the Regs are all using Bellvilles for springing with the Same Piston being used for both Coil spring and Bellevilles.
1200 PSI Regs & Higher are available for $35 more. We carry 800, 1000, 1200 and 1400 PSI Regs. 800 is the best solution when your charging a system meant originally for CO2 pressures. This is the Regulator only and does not include the pressure vessel. It is designed to be used on a 3000 PSI vessel with 5K protection for the vessel and 1.8K protection for the downstream gun on 800, 1000 & 1200 PSI. 1400 PSI and above regs use a 3K burst disc for the downstream and all 3K Tanks use a 5K for the vessel protection.

Share your knowledge of this product. Be the first to write a review »